MULTIPLEX MULTIswitch FLEXX Operations Instructions download pdf (Page 6)

Operating Instructions

MULTIswitch FLEXX

MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten (Gölshausen) • www.multiplex-rc.de Page 2/4

Operating Instructions for MULTIswitch FLEXX • Errors and omissions excepted. •



MULTIPLEX

5.3 SRXL output

The pin header is connected 1:1 to the SRXL input.

You can connect other SRXL-compatible devices. For

example, you can create a chain with several

MULTIswitch FLEXX or connect an SRXL-compatible

stabilisation system.

5.4 LED display

The LED will light up as soon as the MULTIswitch FLEXX

receives the correct data from a remote control receiver or

a PC.

5.5 Jumper U(Bat) / U(Bat)

Jumper U(Bat) connected

When the jumper is connected, the operating voltages of

the MULTIswitch FLEX electronics, the remote control

system and the loads are connected with each other.

In this case, a single voltage source is sufficient to supply

the power. This may be a receiver battery that is

connected to the remote control receiver.

Alternatively, you can use any voltage source that is

connected to the terminal U(Bat).

! Damage due to excessive voltage: Make sure

that the voltage does not exceed 12 volts (3S

LiPo battery). When the jumper U(Bat) is

connected, the maximum operating voltage for

ALL connected components (loads, receiver,

servos) must not be exceeded.

This is usually a maximum of 6 volts for standard

servos.

Figure 2 Example of jumper U(Bat) connected

Figure 3 Example of jumper U(Bat) connected (alternative)

5.6 Jumper U(Bat) / U(Bat)

Jumper U(Bat) disconnected

When the jumper is disconnected, the loads can be

supplied separately via the terminal U(Bat).

In this case, the MULTIswitch FLEXX electronics and the

receiver require their own power supply, e.g. a receiver

battery.

! Damage due to excessive voltage: Make sure

that the voltage for the loads does not exceed 12

volts (3S LiPo battery).

The permissible voltage range of the individual

loads must not be exceeded.

Figure 4 Example of jumper U(Bat) disconnected

Remote control

receiver

SRXL

Receiver battery

Servo

Remote control

receiver

SRXL

Receiver

battery

Servo

Remote control

receiver

SRXL

Receiver battery

Servo

Voltage source

for loads

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

Comments to this Manuals

No comments

MULTIPLEX MULTIswitch FLEXX Operations Instructions Page 6

Comments to this Manuals

Related products and manuals for Toy parts MULTIPLEX MULTIswitch FLEXX