MULTIPLEX MULTIswitch FLEXX Operations Instructions download pdf (Page 5)

Operating Instructions

MULTIswitch FLEXX

MULTIPLEX Modellsport GmbH & Co.KG • Westliche Gewerbestraße 1 • D-75015 Bretten (Gölshausen) • www.multiplex-rc.de Page 1/4

Operating Instructions for MULTIswitch FLEXX • Errors and omissions excepted. •



MULTIPLEX

! These operating instructions are an integral part

of this product. They contain important

information and safety instructions. They must

therefore be kept ready to hand at all times and

passed on to third parties when this product is

sold.

The MULTIswitch FLEXX works with the serial servo

signal MULTIPLEX SRXL. It can therefore be operated by

all SRXL-compatible remote control receivers. These

include:

• All telemetry-compatible receivers

• RX4/9 FLEXX M-LINK ID

• RX4/16 FLEXX M-LINK ID

1 INTRODUCTION

Thank you for choosing to purchase MULTIswitch FLEXX.

MULTIswitch FLEXX is a universal switching module for

model cars, boats and planes. It provides three switching

channels, which can be used for the following functions:

• Controlling lighting, DC motors, horn, foghorn,

headlight flasher, etc.

• Blink mode for direction indicators / hazard lights

• Flash mode for warning lights, position lights, etc.

2 SAFETY INSTRUCTIONS

! Damage due to short circuits: Do not short

terminals 1 to 3 of the switching channels.

! Damage due to reverse polarity: Make sure that

the polarity is correct when connecting a voltage

to the terminal U(Bat).

! Damage due to incorrect voltage: Make sure that

all connected remote control components are

designed for the voltage applied at the terminal

U(Bat). Remove the jumper U(Bat), if necessary.

3 FUNCTIONAL DESCRIPTION

The MULTIswitch FLEXX works with the serial servo

signal MULTIPLEX SRXL. The control information is

transmitted via a single cable from the remote control

receiver to the switching module. This reduces the

amount of cabling required in the model.

Because the MULTIswitch FLEXX is controlled by means

of SRLX, it can be combined with other function modules

or other function modules added.

The MULTIswitch FLEXX can be configured with a

Windows PC so that the three switching channels can be

used flexibly and independently for different purposes.

4 SPECIFICATIONS

Order no.

# 75888

Supply voltage

3.8 – 12 volts

(3S LiPo battery)

Maximum

continuous current

load

9 amps

(3 amps per channel)

5 CONNECTIONS

Figure 1 MULTIswitch FLEXX

1 Switching channel 1

2 Switching channel 2

3 Switching channel 3

4 U(Bat); Terminal for supply voltage

5 Jumper U(Bat)

6 SRXL / Operating voltage (from remote control

receiver)

7 SRXL output (to other switching module or other SRXL-

compatible devices)

8 LED display for receiving data

5.1 Switching channel 1 to 3

Connect the electrical loads here, e.g. LEDs, light bulbs,

motors, horn, etc.

Make sure the polarity is correct when connecting the

loads (e.g. LEDs).

! Damage due to excessive current load: Make

sure that the maximum current load per

switching channel is 3 amps.

5.2 SRXL / Operating voltage

Connect the cable to the receiver output at which the

serial servo signal MULTIPLEX SRLX is output.

This cable also supplies the MULTIswitch FLEXX with its

operating voltage.

1 2 3 4 5 6 7 8 9 10 ... 19 20

Comments to this Manuals

No comments

MULTIPLEX MULTIswitch FLEXX Operations Instructions Page 5

Comments to this Manuals

Related products and manuals for Toy parts MULTIPLEX MULTIswitch FLEXX